1100KV high voltage lines have balloons wrapped around them, which may cause widespread power outages... In the past, it was usually necessary to adopt live processing or power failure processing, but the implementation of various licensing procedures took a long time, and personnel boarding operations, there are certain limitations. With the new equipment, the precise positioning was achieved in 30 seconds and the balloon was cleared in one go.

The solution is a highly sought-after device - the Usiland Smart Grid Cleaning device.

The principle is to use the thermal effect generated when the laser irradiates the material to remotely melt and vaporize foreign bodies, which can achieve the removal of foreign bodies within 20-120 meters of high-voltage transmission lines, such as plastic film, kites, balloons, advertising banners and so on. Compared with the traditional cleaning method, this technology is easy to operate and pollution-free.

In addition to removing foreign bodies, the laser can also be used to clean the "dirty things" on the surface of the object, so that the stain instantly evaporates, and does not harm the equipment and the substrate of the workpiece. Not only that, the generators in the cold areas of the plateau almost suffer from ice problems all year round. Today, a beam of light can melt the ice on the turbine blades in an instant, escorting the power supply in the high and cold regions of the plateau.

Laser cleaning

Rust corroded metal with a laser cleaning machine immediately bright as new, poor texture weld after laser cleaning also become smooth and beautiful... Laser cleaning technology research started in the mid-1980s, but it was not until the early 1990s that it really entered industrial production, and gradually replaced traditional processes such as sand blowing, mechanical grinding and chemical corrosion in many occasions.

Foreign laser cleaning decontamination range is very wide, from the thick rust layer to the laser surface of the fine particles can be removed, in decontamination involving the laser cleaning experiment used in the type of equipment is also more, the laser wavelength range is wide, but the development of laser cleaning technology is unbalanced, some have achieved industrialization and some are still in the laboratory stage.

With the advancement of technology, more and more innovative solutions are being discovered to address different problems. One of the innovative solutions that has revolutionized the way we deal with birds in urban spaces is the laser bird deterrent system.

For birds, vision is the most sensitive. Inspired by bionics in design, the laser bird repellent can emit a rod-like green laser with a diameter of 100mm and a wavelength of 520-532nm during operation, simulating the conditions for biological visual reflection. When the green laser rod is sprayed over, birds are like seeing a green stick,  thus achieving the bird repellent effect without harming the birds.

Ornithologists have demonstrated through numerous experiments that bird eyes are the most sensitive to the 520-532nm laser beam.

1. The International Bird Strike Committee recommended the practices of bird repellent and wildlife control.

 2. Comparative Statistics of International Bird Strike Status） 

So what are the advantages of laser bird repellents?First,it has Long Service Life,The entire body is made of materials that achieve waterproofing, anti-thunder, and anti-radiation effect.This fully ensuring safe and stable operation.At the same time,long service life and low long-term investment cost.This greatly reduces the cost of enterprise.The second advantage is the long-Lasting effect.Bird vision is very sensitive, especially to green lasers with a wavelength of 532nm, with natural resistance and inadaptability.The third is the safety guarantee.It is a visual bird repellent and there is no harm to humans or birds.Also,there is no consumables, no chemicals  and no pollution to the environment.It is completely environmentally friendly.In the end, laser bird repellents can be used unlimited by weather and environment, repelling birds anytime and anywhere.

The range required for different sites varies,Usiland laser bird repellent is able to change the scanning range and laser intensity at any time.This ensures that we can change the range of the bird and the range of laser irradiation at any time.Changes can be made according to different circumstances.

Some people may wonder, that can laser bird repellent accurately identify different objects or humans?AI can recognize birds and distinguish among birds, humans, and other objects.Deep learning image recognition algorithm, with a recognition ability approaching 100%.

A laser bird deterrent system, or laser bird repeller, is a non-lethal, humane, and eco-friendly solution for deterring birds from landing or roosting on buildings, airports, and other structures. The system works by using laser beams to create a visual and physical barrier that disorientates and discourages birds from landing in the area.

Apart from its practicality in deterring birds, the laser bird deterrent system has found broad applications, making it an essential tool in different sectors. Take airports, for example. Bird infestations can cause significant damage to aircraft, leading to millions of dollars in maintenance and repair costs. By installing the laser bird deterrent system, airports can discourage birds from nesting in their facilities, and ultimately, reduce bird strikes.

Furthermore, the laser bird deterrent system has been adopted in agriculture to protect crops from birds. Birds are naturally attracted to crops, and their presence can cause irreparable damage that can lead to crop failure. The laser bird deterrent system provides farmers with an effective and environmentally friendly means of preventing bird attacks on crops.

The application of this technology extends to the marine industry, where it is used to prevent seabirds' interference on offshore structures. Seabirds are a common sight at sea, and they can cause severe damage to oil rigs and wind farms. By installing laser bird deterrent systems, these offshore structures can be protected, and seabird interference mitigated.

In conclusion, the applications of laser bird deterrent systems are broad and varied, making it an essential tool for different sectors. The use of this technology has helped reduce damage, improve safety, and prevent birds from suffering. As more industries continue to learn about the effectiveness and benefits of this technology, the use of laser bird deterrent systems is expected to grow significantly.

Laser etching machine is a highly advanced technology that uses laser beams to create precise and permanent markings on a wide range of materials. This product has gained immense popularity due to its numerous advantages over traditional marking methods such as inkjet printing, chemical etching, and mechanical engraving. In this article, we will discuss the advantages of laser etching machines and their diverse applications.

Advantages of Laser Etching Machines:

1) High Precision: Laser etching machines offer an unmatched level of precision when it comes to creating markings on various materials. These machines can produce complex and intricate designs with sharp edges and smooth finishes.

2) Non-Contact Process: Laser etching machines are a non-contact method, which means that the laser beam does not physically touch the material during the process. This eliminates any possibility of damage to the material and ensures a smooth and clean finish.

3) High Speed: Laser etching machines can mark materials at high speeds, making them ideal for mass production environments. These machines can mark hundreds of parts in just a few minutes, thereby increasing productivity and reducing costs.

4) Versatility: Laser etching machines can mark a wide range of materials, including metals, plastics, ceramics, glass, and more. This makes them suitable for various industries such as automotive, aerospace, medical, and electronics.

5) Environmentally Friendly: Laser etching machines do not require any harmful chemicals, unlike traditional etching methods. This makes them an environmentally friendly option, reducing the use of hazardous materials and minimizing waste.

Applications of Laser Etching Machines:

1) Automotive Industry: Laser etching machines are commonly used in the automotive industry for marking engine components, chassis, and body parts. The marking of the Vehicle Identification Number (VIN) is also done using this technology.

2) Medical Industry: Laser etching machines are used in the medical industry to mark surgical instruments, medical devices, and orthopedic implants. These markings ensure traceability and help prevent counterfeit products from entering the market.

3) Art and Crafts: Laser etching machines are also used in the art and crafts industry for creating intricate designs on various materials such as wood, glass, and leather.

4) Jewelry Industry: Laser etching machines are used in the jewelry industry for engraving fine designs on metals and precious stones.

5) Electronics Industry: Laser etching machines are used in the electronics industry for marking electronic components such as circuit boards, microchips, and semiconductor wafers.

In conclusion, laser etching machines offer numerous advantages over traditional marking methods and are widely used in various industries that require precise and permanent markings. These machines have revolutionized the way we mark and label products, making them more efficient, cost-effective, and environmentally friendly.

On October 23, 2021, the 29th Intelligent Transportation World Conference lnnovation Competition and the second "Gusu Cup" Youth Intelligent Transportation lnnovation Technology Application Competition Intelligent Engineering Equipment :Special Competition was grandly held in Suzhou Xiangcheng District High-speed Railway Jinke Hotel. This conference is the most influential comprehensive international conference in the field of intelligent transportation, and it is also the exhibition and exchange platform for the most advanced, largest and widest transportation technologies and products in the field of intelligent transportation.

The meeting was hosted by the China Railway Fifth Survey and Design Institute Group Co, Ltd. With the theme of "Intelligent Equipment, Serving Transportation", the special competition is positioned at independent innovation and intelligent manufacturing. It focuses on displaying the development achievements of the intelligent equipment industry, and uses the competition as a link to build an industrial alliance and innovation platform in the field of global intelligent engineering equipment, and promote national transportation The industry's intelligent equipment industry continues to develop.

In the early morning of October 23, the team led by the general manager of Usiland company, and the marketing director and technical director set off to participate in the competition. The laser barrier remover products for railways in this competition  have attracted the attention of experts and participating units as soon as they were the competition.In the exhibition link, our company made a report and explanation from all aspects of the application scenarios of the railway laser barrier remover, the advantages of the equipment, the processing speed, the safety protection, the intelligent control, the current market demand and the social benefits. It is reported that the current demand for laser barrier remover products in railways, rail transit and other industries is also extreme.

The principle of the laser smart grid clearance device: the high-energy laser is used to instantly ablate foreign objects wound on the high-voltage line without damaging the power transmission line.When it is found that there is a foreign body hanging on the round wire of the transmission line that affects the safe operation of the line, the operator aims at the target through the sight on the ground, controls the laser to emit the laser, and after a few seconds of melting. the foreign body of the plastic fiber material is melted off and shut down. Laser, thereby completing the entire charging process of foreign objects.

The object can be cleaned: it can clean up no-metallic foreign objects such as kites, fishing nets. Banners, shade nets,balloons,branches, hornet’s nests, bird nests, agricultural plastic films, etc. on the power grid, with a working distance of 0-300 meters.

"Product advantages of the laser smart grid clearance device: it can realize, remote and non-contact operation to meet the convenient removal of railways and overhead lines,high-voltage equipment and approaching non-metallic foreign objects. It replaces the high-altitude operation hazards of traditional foreign object removal methods and planned power outages. Reduction, cumbersome preparations. excessive input of manpower and material resources, etc. effectively reduce labor intensity and risks, and improve comprehensive operational benefits The entire process of removing obstacles only takes a few minutes. some even a few seconds, and the cleaning efficiency is very high, and it is honored as the "Magic tool for removing obstacles" in the industry.

For more information, please follow us:

Official website: www.usilandcn.com

Customer Service Phone: 400-005-3391

Sales Hotline/WhatsAPP: +086-18306213801

Email: jiulie.zhou@usiland.com/xszl@usiland.com

Address: 2nd Floor, Building C, Dongfang Chuangzhi Park, No. 18, Jinfang Road, Suzhou lndustrial Park, Jiangsu Province.

The application of laser tire mold cleaning machine has revolutionized the automobile industry by providing a highly efficient and eco-friendly solution for mold cleaning. This cutting-edge technology has been proven effective in removing even the most stubborn contaminants from tire molds, improving production efficiency and reducing downtime. In this article, we will explore the benefits and real-world applications of laser tire mold cleaning machines.

One of the primary benefits of laser tire mold cleaning machines is the elimination of abrasive cleaning methods. Previously, grit-blasting and chemical cleaning were the most commonly used methods for cleaning tire molds. These methods are not only inefficient and time-consuming but also pose environmental risks and can damage the molds. In contrast, the laser tire mold cleaning machines use a high-intensity laser beam that vaporizes the contaminants without causing damage to the molds. The result is a faster, safer, and more eco-friendly cleaning process.

Real-world applications of laser tire mold cleaning machines are numerous. For example, a tire manufacturing plant in China was looking for a solution to increase efficiency and reduce waste. They had been using chemical cleaning for years but found it to be time-consuming and hazardous to the environment. The plant invested in a laser tire mold cleaning machine, and the results exceeded expectations. The machine reduced downtime, improved productivity, and eliminated the need for chemicals, which is estimated to have saved the plant 20,000 RMB per month.

Another application of laser tire mold cleaning machines is in the aerospace industry. A company that manufactures aircraft tires was struggling with the removal of carbon deposits on their molds. They had been using grit-blasting, but the abrasive method was causing damage to the molds. After switching to a laser tire mold cleaning machine, they were able to remove the carbon deposits without damaging the molds. Moreover, the laser cleaning process is non-contact, which eliminates the risk of contamination and damage from physical contact.

In addition to its efficiency and environmental benefits, laser tire mold cleaning machines are also cost-effective in the long run. Although they have a higher upfront cost compared to traditional cleaning methods, they require less maintenance and have a longer lifespan, which translates to cost savings over time.

In conclusion, the application of laser tire mold cleaning machines has revolutionized the mold cleaning process in the automobile industry. The efficiency, eco-friendliness, and cost-effectiveness of this technology make it a popular choice for many manufacturing plants worldwide. Real-world examples have shown that laser tire mold cleaning machines are effective in improving production efficiency, reducing downtime, and eliminating the use of hazardous chemicals. With these benefits, it is clear that the laser tire mold cleaning machine is a valuable addition to any manufacturing plant.