Smart grid cleaning device Cyclone 500 | USILAND 1

Smart grid cleaning device Cyclone 500 | USILAND 2

Smart grid cleaning device Cyclone 500 | USILAND

Working distance: 300 meter

Power: 500W

Weight: 29.5kgs

Two Physical Functions

• Foreign objects are vaporized (falling off due to sublimation)

• Melted due to instantaneous high temperature

Inquiry

Write a Review

Product Advantage

● Short time solution to avoild outage

1-2 minutes for operation, very quick to remove the objects

● Send laser from ground, no dangers

No need to climb the powerline tower, reduce danger to workers

● No damage to powerline

Cut off in a very short time, no damage to powerline

● Long working distance : 100~300m

100-300M working distance suit to different situations.

● No limit from the weather

No matter rainy, windy or snowing, both avaliable to work

● No additional consumable material, good cost performance from long term

Once connect to the power, it will work, no oil, gas..etc.

Basic Parameters

This series of laser power grid foreign object removal devices is specifically designed for the rapid removal of exposed power grid foreign objects, providing an ideal and efficient remote laser foreign object removal device for maintaining the safety of power grids and high-speed railway lines.

Project name	Parameter data	Project name	Parameter data
Product name	Cyclone-500	*Size (hwd) [mm³]*	610440326
Weight [KG]	24.5	Laser type	Continuous fiber laser
Average laser power [W]	500	Output power instability [%]	3
Laser control range [%]	20~100	Central wavelength [nm]	1080
Ambient humidity [%]	10~90	Operating ambient temperature [℃]	-20~40
Fiber length [cm]	270±10	Farthest working distance [m]	300
Supply voltage [V]	48	Battery specification [V AH]	48 53
Working hours at full capacity [H]	2	Battery weight [KG]	12.6
Maximum power consumption [W]	1600	Cooling system	Air cooling
Clearance efficiency	100M takes 5S to remove plastic hanging objects (For reference only, the specific material and width of the material to be removed are related)

Smart grid cleaning device Cyclone 500 | USILAND 8

Working Principle

High-energy laser is utilized to instantly dissolve foreign objects entangled in high-voltage lines without damaging transmission lines.

When it is found that there is a foreign object hanging on the grounding wire that affects safe operation, the operator aims at the target through a sight on the ground, controls the laser device to emit laser.

Through several seconds of burning and melting, the plastic-fiber foreign object is melted off, and the laser is turned off, thus completing the entire processes of handling foreign object with electricity.

The target objects of the smart grid cleaning device mainly include balloons, kites, and plastic bags.

The 500W model, with high power, is specifically designed for clearing tree branches (above 10cm).

Product Details

22 (16)

23 (12)

24 (10)

25 (8)

26 (7)

battery

leaser head

main body (2)

Setup Device

Aiming Object

Remove Object

Step1: Aiming at the object by the device.

Step 2: Lasing from the ground.

Step 3: Using the laser energy to cut off the object on the powerline.

Steps for usage

Setup Device

Aiming Object

Remove Object

Smart grid cleaning device Cyclone 500 | USILAND 17

Step1

Aiming at the object by the device

Smart grid cleaning device Cyclone 500 | USILAND 18

Step2

Lasing from the ground

Smart grid cleaning device Cyclone 500 | USILAND 19

Step3

Using the laser energy to cut off the object on the powerline.

Safety Design

Personal induction system

The device will detect if any people front of it in a certain distance.

Emergency button

If any emergency occurs, you can press this button to shu off the device in a short time.

Laser control pad

The laser can be controled using laser pad.

Safety key switch

Double insurance for starting the device.

Battery to achieve EMC dynamic

The APP displays the battery status.

Product Advantages Compared With Traditional Models

The removal of foreign objects in transmission lines is an important part of power maintenance and repair. The timely removal of foreign objects is related to the safe operation of the power grid and the safety of people's lives. The methods for handling foreign objects in power lines can be divided into live work and power outage work, which affect the reliability of power supply.

Traditional Methods

The main method for handling foreign objects in live work is ground potential operation, and traditional methods mainly include insulated operating rod method, flip bucket pulley method, insulated rope method, and drone fire spraying method. This type of homework method is limited by the ground environment and the hanging position of foreign objects, which has limitations in handling foreign objects in the grounding wire far from the tower. The operation process is complex, time-consuming, and poses certain personnel safety risks.

Workers climb to remove:

Disadvantage:
1. Need cut off the power supply before operation, cause money lose.
2. Dangerous, big risk of accident.
3. Long time for operation.
4. Affected by weather.